Описание
Ruckus ICX7750-48F – высокопроизводительный L3 коммутатор уровня ядра, оснащенный 48 гигабитными портами SFP, 6-ю портами QSP 40 Gbps и 1-м слотом для установки опциональных модулей для стекирования / uplink. Коммутатор обеспечивает производительность на уровне 1.92 Тбит/с (до 5.76 Тбит в стеке; максимум 12 коммутаторов).
Характеристики Ruckus ICX7750-48F
| Интерфейсы | 48 x SFP+ 1/10 Gbps 1 x Modular Slot |
| Пропускная способность | до 1.92 Тбит/с (до 5760 Гбит/с в стеке) |
| Слотов расширения | 1 |
| Поддержка IPv4/IPv6 Layer 3 Routing | есть |
| Расширенные функции IPv4/IPv6 Layer 3 Routing (OSPF, BGP, VRRP, PIM, PBR, VRF) | с дополнительной лицензией |
| Максимальное количество коммутаторов в стеке | до 12 |
| Максимальная дистанция стекирования | 10 км |
| RAM | 8 Гб |
| Таблица MAC-адресов | 96 000 |
| VLAN | до 4096 |
| PVLAN | до 32 |
| STP | 254 |
| Максимальное количество маршрутов | 128K (IPv4) 7K (IPv6) 16 000 (Next Hop Addresses) |
| Транкинг | Максимальное количество портов в транке: 16 Максимальное количество групп транков: 256×8 |
| Jumbo Frames | 9 216 Байт |
| Очередей QoS | до 8 на порт |
| Групп Multicast | 8 192 (Layer 2) 6 144 (Layer 3) |
| Функции L2 | 802.1s Multiple Spanning Tree 802.1x Authentication Auto MDI/MDIX BPDU Guard, Root Guard Dual-Mode VLANs MAC-based VLANs, Dynamic MAC-based VLAN activation Dynamic Voice VLAN Assignment Dynamic VLAN Assignment Fast Port Span GVRP: GARP VLAN Registration Protocol IGMP Snooping (v1/v2/v3) IGMP Proxy for Static Groups IGMP v2/v3 Fast Leave Inter-Packet Gap (IPG) adjustment Link Fault Signaling (LFS) MAC Address Filtering MAC Learning Disable MLD Snooping (v1/v2) Multi-device Authentication Per-VLAN Spanning Tree (PVST/PVST+/PVRST) Mirroring – Port-based, ACL-based, MAC Filter-based, VLAN-based PIM-SM v2 Snooping Port Loop Detection Private VLAN Remote Fault Notification (RFN) Single-instance Spanning Tree Trunk Groups (static, LACP) Uni-Directional Link Detection (UDLD) Metro-Ring Protocol (MRP) (v1, v2) Virtual Switch Redundancy Protocol (VSRP) Q-in-Q Topology Groups MCT (Ruckus Multi-Chassis Trunking) |
| Функции L3 | IPv4 and IPv6 static routes ECMP Port-based Access Control Lists Layer 3/Layer 4 ACLs Host routes Virtual Interfaces Routed Interfaces Route-only Support Routing Between Directly Connected Subnets Virtual Route Redundancy Protocol (VRRP) |
| Расширенные функции L3 (доступны с программной лицензией) | IPv4 and IPv6 dynamic routes OSPF v2, OSPF v3 (IPv6) PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4/IPv6 multicast routing functionality) PBR Virtual Route Redundancy Protocol VRRP v3 (IPv6) VRRP-E (IPv4, IPv6) BGP4, BGP4+ (IPv6) GRE IPv6 over IPv4 tunnels VRF (IPv4 and IPv6) |
| QoS | ACL Mapping and Marking of ToS/DSCP (CoS) ACL Mapping and Marking of 802.1p ACL Mapping to Priority Queue Classifying and Limiting Flows Based on TCP Flags DiffServ Support Honoring DSCP and 802.1p (CoS) MAC Address Mapping to Priority Queue Priority Queue Management using Weighted Round Robin (WRR), Strict Priority (SP), and a combination of WRR and SP Priority Flow Control |
| Управление трафиком | ACL-based inbound rate limiting and traffic policies Broadcast, multicast, and unknown unicast rate limiting Inbound rate limiting per port Outbound rate limiting per port and per queue |
| Безопасность | IPsec 128/256 AES-GCM (with service module) MACsec 802.1X Authentication MAC Authentication Flexible authentication Web authentication DHCP snooping Dynamic ARP inspection Neighbor Discovery (ND) Inspection Bi-level Access Mode (Standard- and EXEC-level) EAP pass-through support IEEE 802.1X username export in sFlow Protection against Denial of Service (DoS) attacks Authentication, Authorization, and Accounting (AAA) MAC Address Locking MAC Port Security Advanced Encryption Standard (AES) with SSHv2 RADIUS/TACACS/TACACS+ Secure Copy (SCP) Secure Shell (SSHv2) Local Username/Password RFC 5176, RFC 5996, RFC 4303, RFC 6379, RFC 5903, RFC 4868, RFC 4754, RFC 4106, SP800-56A Recommendation |
| Управление | DHCP Auto Configuration Configuration Logging Digital Optical Monitoring Display Log Messages on Multiple Terminals Embedded Web Management (HTTP/HTTPS) Embedded DHCP Server Industry-standard Command Line Interface (CLI) Brocade Network Advisor (sold separately) Key-based activation of optional software features USB file management and storage Macro for batch execution Out-of-band Ethernet Management ERSPAN support for remote traffic monitoring TFTP TELNET Client and Server Bootp SNMPv1/v2c DHCP Server and DHCP Relay SNMPv3 Intro to Framework Architecture for Describing SNMP Framework SNMP Message Processing and Dispatching SNMPv3 Applications SNMPv3 User-based Security Model SNMP View-based Access Control Model SNMP sFlow NTP Network Time Protocol Multiple Syslog Servers SCP Virtual Cable Tester (VCT) |
| Наработка на отказ | 353 967 часов |
| Блок питания | 2 x 500 W (AC, опционально) 2 x 500 W (DC, опционально) |
| Шум | 62 dBA |
| Энергопотребление | до 327 Вт |
| Тепловыделение | 1116 BTU/час |
| Климатические условия эксплуатации | температура от -5 до 50° C при влажности от 10 до 95% без конденсации |